滑片式壓縮機采用傳統的、已經得到驗證的技術， 以非常低的速度（1450rpm）直接進行驅動，具有wuyu倫比的的可靠性。 轉子是惟一連續運行的部件， 上面有若幹個沿長度方向切割的槽， 其中插有可在油膜上滑動的滑片。 轉子在氣缸的(de)定子中旋轉。在旋轉期間， 離心力将滑片從槽中甩出，形成一個個單獨的 壓縮室。旋轉使壓縮室的體積不斷減小，空氣壓力不斷增大。 通過注入加壓油來控制壓縮産生的熱量。 高壓空氣從排氣口排出，其中殘留的油通過zui終的(de)油分離器予以清除。 壓縮能力： 康普艾滑片式 空氣壓縮機的功率範圍為 1.1 kW 至 75 kW （1.5 至 100hp），所産生的工作壓力為 7 至 8 和 10 bar （101 至 145psi）。 其典型用途是： OEM、印刷、氣動 實驗室、牙科、 儀表 機床、包裝、機器人。

Sliding vane compressor is driven directly at very low speed (1450 rpm) using traditional and proven technology, and has comparable reliability with Wuyu. The rotor is the only continuous running component with several slots cut along the length direction, and sliders that can slide on the oil film are inserted. The rotor rotates in the stator of the cylinder. During the rotation, the centrifugal force throws the slider out of the groove to form a separate compression chamber. Rotation reduces the volume of the compressor and increases the air pressure. The heat generated by compression is controlled by injecting pressurized oil. The high pressure air is discharged from the exhaust port, and the remaining oil is removed through the Zui final oil separator. Compression capacity: Compaq slider air compressor power range from 1.1 kW to 75 kW (1.5 to 100 hp), resulting in working pressure of 7 to 8 and 10 bars (101 to 145 psi). Its typical uses are: OEM, printing, pneumatic laboratory, dentistry, instrument machine tools, packaging, robots.



空壓機高溫是空壓機使用過程中較常見的故障之一，尤其是對于在室外施工工作的移動式空壓機，在炎熱的夏季更加重了這一問題發生的概率。

High temperature of air compressor is one of the common faults in the use of air compressor. Especially for mobile air compressor working outdoors, the probability of this problem is more serious in hot summer.